Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Gs with success on FC40 but one question

Discussion in 'DJI Ground Station' started by daffydk, Oct 17, 2014.

  1. daffydk

    Joined:
    Sep 25, 2014
    Messages:
    29
    Likes Received:
    1
    Hi i have with succes installed a GS datalink with pmu v2 on my FC40
    but i have a question..
    The link module on the Phantom , where is the best place for it , is it best to velcro the thing under the phantom or is it fine just to have it inside the phantom ( not much Space in there though )

    but its fun to see some live data on the icrap ..

    Chris
     
  2. OI Photography

    Joined:
    Sep 23, 2013
    Messages:
    5,542
    Likes Received:
    17
    Location:
    Clarksville, TN
    Either will work as long as the dual Data Link antennae stay on the outside. I mount the whole thing externally so it's easy to remove when I'm flying without using it and don't want the extra weight.
     
  3. daffydk

    Joined:
    Sep 25, 2014
    Messages:
    29
    Likes Received:
    1
    hmm why didn't i think of that ..
    Well i must get me some Velcro then , and yes the antennas are outside in a 90 degree angle , and it works great .

    Thanks for replying the message
     
  4. SimonH78

    Joined:
    Jul 2, 2014
    Messages:
    320
    Likes Received:
    52
    Location:
    UK-Lancashire
    Mine is stuck underneath with aerial wire going down the front legs and works fine...see pic here - http://www.rotoryrocket.co.uk/setups-ma ... -bus-port/ - plus I dont need the PMU v2 as I have wired it in direct to the H2-3D main board I use on the FC-40 so I can FPV on the H3-3D Zenmuse I have also attached.... :D :D