Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Gimbal lever on remote - center

Discussion in 'Phantom 2 Discussion' started by BZNCREW, Sep 22, 2014.

  1. BZNCREW

    Joined:
    Jan 14, 2014
    Messages:
    12
    Likes Received:
    0
    Is there a trick to marking the gimbal lever on the remote so that the camera stays centered.

    Flying my bird, I accidentally moved the bottom lever and don't know where it was centered. I guess I could put some tape on it.

    For the most part, I don't want to tilt the gimbal. If I do, I want to put it back where I started. Like with a notch or something.
     
  2. HarryT

    Joined:
    Aug 4, 2014
    Messages:
    622
    Likes Received:
    0
    Location:
    Warrington, UK
    You should adjust the gimbal range (PA Software, Advanced -> Gimbal) so that the camera points horizontally at one end of the tilt lever's range of motion, and vertically at the other end of the range. While you're there, turn the gain right down so the motion is slow and smooth.