Hi, I bought several new Advanced gimbals for my Phantoms - but it is not possible to flash firmware to drone. There is Pro firmware installed in all boards and it works with Pro gimbals. But as all working Pro control boards already burned themselves to death (DJI fault, poor design) when flashing firmware, it is necessary to flash Advanced firmware to all drones.
There was no problem to flash Pro firmware to Adv drones - just installed Pro gimbal on the drone and Pro firmware to SD card, it was flashed.
But I dont know hot to reverse this process - flash Adv firmware to drones with Pro.
P3Sxxxxxxx.bin file is ignored.
P3S_FW_DEBUG ignored.
P3X_FW_DEBUG ignored.
No file created in logs or root folder.
All gimbals blinking green for a while, then red. There is no error in DJI Go,
only message that camera firmware update is required.
There was no problem to flash Pro firmware to Adv drones - just installed Pro gimbal on the drone and Pro firmware to SD card, it was flashed.
But I dont know hot to reverse this process - flash Adv firmware to drones with Pro.
P3Sxxxxxxx.bin file is ignored.
P3S_FW_DEBUG ignored.
P3X_FW_DEBUG ignored.
No file created in logs or root folder.
All gimbals blinking green for a while, then red. There is no error in DJI Go,
only message that camera firmware update is required.