- Joined
- Jul 27, 2014
- Messages
- 5
- Reaction score
- 0
Thanks in advance for any hints/help. My Phantom 2 Vision+ has been flying and working great, until now.
I attempted to update the firmware on my Vision+ by copying the bin file to the SD card and restarting the Phantom.
I suspect I turned the phantom off too soon and may have interrupted the update process.
It is possible, though, that there is a different problem completely and that the firmware did actually finish updating.
I can connect to the Phantom's wifi network but if I access Camera or Album, I get "Connection to Phantom Failed".
Also, when I connect to the PC via USB, the computer can no longer access the storage.
The remote can still make the props start/stop but I haven't tried actually flying it again.
The start up lights and beeps all seem normal.
I have seen reference to doing a factory reset but cannot find how to do this.
Can anyone suggest some things to try?
I did a rebind of the controller but that did not solve the problem.
EDIT: Updated with attempted fix and corrected description of symptoms.
I attempted to update the firmware on my Vision+ by copying the bin file to the SD card and restarting the Phantom.
I suspect I turned the phantom off too soon and may have interrupted the update process.
It is possible, though, that there is a different problem completely and that the firmware did actually finish updating.
I can connect to the Phantom's wifi network but if I access Camera or Album, I get "Connection to Phantom Failed".
Also, when I connect to the PC via USB, the computer can no longer access the storage.
The remote can still make the props start/stop but I haven't tried actually flying it again.
The start up lights and beeps all seem normal.
I have seen reference to doing a factory reset but cannot find how to do this.
Can anyone suggest some things to try?
I did a rebind of the controller but that did not solve the problem.
EDIT: Updated with attempted fix and corrected description of symptoms.