Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Confirm my setup...

Discussion in 'FPV (First Person View)' started by Danielhv, Aug 4, 2014.

  1. Danielhv

    Joined:
    Jul 31, 2014
    Messages:
    87
    Likes Received:
    1
    Going on a Phantom 1 that will be converted to a 1.5...

    So far, I have the shell and upgrade board on the way. Here is my plan:

    - Black Pearl 7" 7ch SMA w/RX
    - ImmersionRC 600mw vTX
    - ImmersionRC 5.8GHz Circular Polarized SpiroNet Antenna V2 (one on TX, one on RX)
    - Immersion Fatshark SpiroNET CP Patch 5.8GHz Antenna (SMA) 13dBi Gain (on RX as well)
    - Tarot 2D or Zenmuse 3D... (cant seem to find much on these being installed on a 1 or 1.5...)

    Thoughts?
     
  2. EMCSQUAR

    Joined:
    Sep 5, 2013
    Messages:
    1,692
    Likes Received:
    6
    Location:
    N 44.895 W 93.354 Minnesota
    Have you checked here? -> viewtopic.php?f=29&t=7017

    I've converted a couple and all have Zenmuse H3 3D's

    Re: your set up - looks ok, I prefer the Boscam 32 channel 600w Tx easier to switch channels when flying near others or in different areas along w/Black Pearl. The Zenmuse is the better option for 2 reasons - smoother operation and lighter.