Hello all,
I have my PV2+ now for a week and after my 7th flight i decided to upgrade to version 3.02 because DJI say everywhere how important it is to be on the latest version.
After the update i did everything like we read here and is in the manual like correct calibration.
Green lights (Phantom mode), takeoff and somewhere around 5/7 meters it just fel as a stone out of the sky a complete power outage.
I took it home, and it was going on i connected it to the assistant software to see if i have some battery readings, now the battery say :
NON Dji intelligent Battery
Gimbal is not straight anymore, and i have no idea what more could be broken i still have a picture on the APP but it say the gimbal is blocked.
I was just taking off for some pictures so i have no recording of this event, my local dutch supplier say it is going to take weeks before DJI is going to take a look at it and whitout any footage they can say whatever they want of course.
What kind of tips could you give me how to deal with a situation like this ?
Here is some more information i could collect out of the RC and Assistant software :
Main Controller 29.0.2.1 / firmware 3.02
GPS Firmware 6.0.1.4
Reciever 5.8G 1.0.1.3
P330CB 26.0.0.0 / Firmware 1.0.1.27
Battery 1.5.0.0 / Firmware 2.0.0.0
Zen IMU 0.0.0.8 / Firmware 1.0.0.4
Phantom mode / CE
Any tips ?
Heico
I have my PV2+ now for a week and after my 7th flight i decided to upgrade to version 3.02 because DJI say everywhere how important it is to be on the latest version.
After the update i did everything like we read here and is in the manual like correct calibration.
Green lights (Phantom mode), takeoff and somewhere around 5/7 meters it just fel as a stone out of the sky a complete power outage.
I took it home, and it was going on i connected it to the assistant software to see if i have some battery readings, now the battery say :
NON Dji intelligent Battery
Gimbal is not straight anymore, and i have no idea what more could be broken i still have a picture on the APP but it say the gimbal is blocked.
I was just taking off for some pictures so i have no recording of this event, my local dutch supplier say it is going to take weeks before DJI is going to take a look at it and whitout any footage they can say whatever they want of course.
What kind of tips could you give me how to deal with a situation like this ?
Here is some more information i could collect out of the RC and Assistant software :
Main Controller 29.0.2.1 / firmware 3.02
GPS Firmware 6.0.1.4
Reciever 5.8G 1.0.1.3
P330CB 26.0.0.0 / Firmware 1.0.1.27
Battery 1.5.0.0 / Firmware 2.0.0.0
Zen IMU 0.0.0.8 / Firmware 1.0.0.4
Phantom mode / CE
Any tips ?
Heico