I just got a new Phantom 3 Pro, charged everything up and tried to get going but I'm stuck. I already have a P2v+ so I'm somewhat familiar with the platform.
The DJI GO app will not connect with the remote. It just sits on the main screen where it says "How to Connect". The only indication it is connected is the tablet beeps and shows charging when plugged to the remote. I have tried on IOS (Ipad) and a Android (Kind Fire). I made sure usb debugging was enabled on the fire in case that mattered. I've tried 3 different cables, re-installing the app, restarting the tablet, upgrading from IOS 8 to 9, all iterations of starting and plugging order.
Second problem is I can't get the motors to start, and with no app don't have any idea what's happening or even what version the firmware is. The remote shows it's linked with a green light, the P3 shows ready to fly with slow green flashing indicator LED's, but moving the sticks to the bottom corners does nothing. I know the remote is somewhat linked because the gimbal control moves the camera. Also pressing the left stick moves the camera slightly(I assume this is some kind of movement compensation but don't know).
Is there something that stops you from flying if you haven't registered or something, or should I be able to fly without the app?
Phantom 3 Pro: W323A
Remote: GL300B
Am I doing this right, anyone have any clues?
The DJI GO app will not connect with the remote. It just sits on the main screen where it says "How to Connect". The only indication it is connected is the tablet beeps and shows charging when plugged to the remote. I have tried on IOS (Ipad) and a Android (Kind Fire). I made sure usb debugging was enabled on the fire in case that mattered. I've tried 3 different cables, re-installing the app, restarting the tablet, upgrading from IOS 8 to 9, all iterations of starting and plugging order.
Second problem is I can't get the motors to start, and with no app don't have any idea what's happening or even what version the firmware is. The remote shows it's linked with a green light, the P3 shows ready to fly with slow green flashing indicator LED's, but moving the sticks to the bottom corners does nothing. I know the remote is somewhat linked because the gimbal control moves the camera. Also pressing the left stick moves the camera slightly(I assume this is some kind of movement compensation but don't know).
Is there something that stops you from flying if you haven't registered or something, or should I be able to fly without the app?
Phantom 3 Pro: W323A
Remote: GL300B
Am I doing this right, anyone have any clues?