- Joined
- Sep 30, 2014
- Messages
- 19
- Reaction score
- 1
Hey guys been reading a lot on this forum recently and decided to make an account to introduce myself....
Arvy is the name and i am a 22y/o DJI Phantom FC40 Pilot from the City of Honolulu, Hawaii in the USA.
i`ve been flying my FC40 for couple of months now and i say this flying machine is awesome,
i have been into a lot of trouble from either inside or outside of the FC40, but actually able to fix them with some research over the net.
My FC40 is been set up as an FPV machine, below are the equipments (if interested) i used onboard and groundstation.
-ONBOARD-
+DJI Phantom FC40(Stock)
+2.4gHz LawMate Video Transmitter (vTX)
+2.4gHz Bluebeam Omni-directional antenna (vTX side)
+GoPro Hero3 White Edition
+GoPro Hero3 mini USB to vTX cable (to transmit the GoPro video to the vTX)
+GoPro Hero3 32mm CPL Lens
+1000mAh 3s LiPo Battery (to power the vTX)
+Phantom 2 9443 Self Tightening Propellers
+2200mAh Turnigy 3s LiPo Battery (to power the FC40)
+2x Original Green Strobon Strobe Lights (this two has been installed from inside the FC40 by drilling the two front facing air vent)
+2x Blue Strobon XL Strobe Lights (each of this has a non blinking blue led, and white blinking strobe led light, both are attatched in bottom side battery compartment of the FC40)
-Ground Station-
+FatShark Teleporter V3 (Note: i do not use the integrated 5.8gHz receiver in the goggles, i have an external 2.4gHz receiver that matches the vTX)
+2.4gHz external receiver
+7" LCD Monitor (this is attached inside the FC40 case for external video output just incase there are others who want to join the fun)
+2.4gHz Bluebeam Mad-mushroom Omni-directional antenna (vRX version)
+2200mAh 3s LiPo Battery (to power the LCD)
Pictures and a video link will be provided
https://www.youtube.com/watch?v=PNPvLCZhLiU
Arvy is the name and i am a 22y/o DJI Phantom FC40 Pilot from the City of Honolulu, Hawaii in the USA.
i`ve been flying my FC40 for couple of months now and i say this flying machine is awesome,
i have been into a lot of trouble from either inside or outside of the FC40, but actually able to fix them with some research over the net.
My FC40 is been set up as an FPV machine, below are the equipments (if interested) i used onboard and groundstation.
-ONBOARD-
+DJI Phantom FC40(Stock)
+2.4gHz LawMate Video Transmitter (vTX)
+2.4gHz Bluebeam Omni-directional antenna (vTX side)
+GoPro Hero3 White Edition
+GoPro Hero3 mini USB to vTX cable (to transmit the GoPro video to the vTX)
+GoPro Hero3 32mm CPL Lens
+1000mAh 3s LiPo Battery (to power the vTX)
+Phantom 2 9443 Self Tightening Propellers
+2200mAh Turnigy 3s LiPo Battery (to power the FC40)
+2x Original Green Strobon Strobe Lights (this two has been installed from inside the FC40 by drilling the two front facing air vent)
+2x Blue Strobon XL Strobe Lights (each of this has a non blinking blue led, and white blinking strobe led light, both are attatched in bottom side battery compartment of the FC40)
-Ground Station-
+FatShark Teleporter V3 (Note: i do not use the integrated 5.8gHz receiver in the goggles, i have an external 2.4gHz receiver that matches the vTX)
+2.4gHz external receiver
+7" LCD Monitor (this is attached inside the FC40 case for external video output just incase there are others who want to join the fun)
+2.4gHz Bluebeam Mad-mushroom Omni-directional antenna (vRX version)
+2200mAh 3s LiPo Battery (to power the LCD)
Pictures and a video link will be provided
https://www.youtube.com/watch?v=PNPvLCZhLiU