Advanced Calibration Question

[MapMaker53]

When performing advanced calibration, a message instructs one to keep the controller horizontal during the procedure. When I lay the controller down, it actually sits at a small angle due to the silver bracket and the wifi extender. Is that DJI's idea of horizontal? Or am I supposed to prop the lower end up so that the back (bottom) of the white controller is perfectly horizontal during calibration?

 

[pb7424]

They are talking about the Phantom itself, not the transmitter. Use a level.

 

[MapMaker53]

Thanks. Thought they meant to keep both horizontal.

 

[Mako79]

Mc = main controller board = phantom.
Make sure it's horizontal with the horizon and not the coffee table. Use a bubble/spirit level.
Also do the advanced when the phantom is first turned on and cold. It makes the calibration quicker and possibly more accurate.

 

[slothead]

The problem I have with it is that it never tells you when it's done!

 

[MapMaker53]

Silly me. I thought the main controller board would be in the controller. LOL

 

[paulajayne]

Silly me. I thought the main controller board would be in the controller. LOL

No the TX gremlin lives in there.

No such thing as a daft question. Instruction are not too clear at times.

 

[Trazor]

Silly me. I thought the main controller board would be in the controller. LOL

Youre not the first one....

 

[Mako79]

The problem I have with it is that it never tells you when it's done!

It does on the PC. Wait for the small green tick next to the status completion bar..

 

[ToThePoint]

The problem I have with it is that it never tells you when it's done!

It does when that green square with bird pops up next to the progress bar.