Recent content by onderwaterfoto

Hi there, Maybe someone can share their knowledge and experiences with me. I own a Phantom FC40. I dont use the FC40 camera but i have a Walkera gimbal and a gopro camera. The remote control is on 5.8ghz (same as phantom vision), so i use a boscam TS321 500mw on 2.4 ghz for fpv. I use...

Not your fault of course. But thanks for the link, got me something further. So i get an idea what is out there in the market for 2.4 ghz fpv.

Thanks but those look similar to mine. And they don't ship to Europe.

I just saw the website fpvlr. One of the few offering 2.4 for fpv. Which one would you recommend? Below is exactly what i have now. http://fpvlr.com/shop/index.php?route=p ... duct_id=71 And this is the transmitter and receiver for fpv: http://boscam.cn/ts321rc802.html

Thanks for your answer and no i dont have it wrong. I have the phantom with 5.8 ghz transmitter (orginally it was the FC40). And i use 2.4 ghz for fpv. There are not many antennas for 2.4 ghz on the market, but if you know something, please let me know.

Hi there, I have a phantom with a 5.8 ghz transmitter (stock) and a Boscam 2.4 ghz transmitter and receiver (500mw), I use cloverleaf antennas. My range is aprox. 500-600 meters. Can anyone provide me with some tips to increase this? I fly in a park with no housings. Also I notice that when i...

Hi, I'm using 2.4 ghz for FPV. Does anyone know an adress or shop where I can buy 2.4ghz spironet antennas? please let me know.

Hi there, I got the g2-d gimbal and installed it and installed the lever on the back of the tx. I connected the pit cable (white) to the lower ping on the F2 port of the naza. But the gimbal does not tilt when i move the lever. I enabled the gimbal in the naza software. Any thoughts? What am...

Hi there, I got the g2-d gimbal and installed it and installed the lever on the back of the tx. I connected the pit cable (white) to the lower ping on the F2 port of the naza. But the gimbal does not tilt when i move the lever. I enabled the gimbal in the naza software. Any thoughts? What am...

Hi, I have some question about walkera g2d gimbal en boscam fpv. I have 3 questions and maybe someone knows them: 1) How do I power the gimbal? I know the aux cable, which is 11.1v right? Can that be connected with jst plug straight to the gimbal? 2) I also bought the boscam ts321 and rc302...

Hi, I was following this thread with great interest and my g2d is in transport. I have 3 questions and maybe someone knows them: 1) How do I power the gimbal? I know the aux cable, which is 11.1v right? Can that be connected with jst plug straight to the gimbal? 2) I also bought the boscam...

Of course I mean the lens of the Go Pro camera and not the housing.... Just for the record:

Really strange, I finally got my g-2d. I tried to test it before i install it on my phantom, so i hooked a 11.1v 3s lipo to it. I saw a small spark and the gimbal is totally dead. I'm afraid I fried it. Just for me to know: I can use a 3s lipo to try it?

Just a tip from me. I scratched the lens of my go pro hero 3 black camera. Through this board I found a company who sells them for around 190 dollar. But I live in Europe and with clearing and VAT (outside EU) and shipping, this was very expensive. But I found a company in Germany who are...

Thankx, i will try