Recent content by malongolo

Sorry for the late reply. You guys are right, the thread title was not accurate, my bad. I got my drone back, I paid for the repair and now it flies perfectly, I hope it does not go down again. Thanks for your help.

While I was flying on the mountain, right after taking off, when the aircraft was about 40m away from, got this message, And the aircraft decelerated, yes it decelerated... as it fell like a stone.... Luckily it was in the forest instead of highway or street, and nobody got hurt. I sent it...

Hi there, after a crash with my P3S the front right motor does not spin. I changed it for the opposite one, to check if there was a problem with the rotor and the rotor was OK. Therefore the problem should be on the motherboard. What can I do/check now in order to solve/localize the problem...

Hi again, after all this time I got a new ribbon cable and changed for the old one. The idea was to make sure the problem was not because of the wire. Once the wire was changed, the gimbal had green light and was moving perfectly, I tried to rebind the aircraft again (manual and DJI method)...

Great, I was also looking through but I could not find anything thanks Rod

Hi Rod, I don't think there is any problem, but I would be happy to check everything. I think i cannot check the firmware of the aircraft without access to the it through app. In case there is anyway, please share. Any advice is welcome. thanks

Thank you Rod. I had already tried the method mentioned on that thread (the one turning down the gimbal wheel and moving S2 up and down) but I did not get anything. The only thing I can imagine is that the firmware is not the same, but how can I check/fix this? Thanks for your time

How can I check the aircraft's firmware without acess it through the app?

I have just tried with another control. Still no answer from the Aircraft.

Hi there, I had an aircraft accident and I needed to repair the gimbal. In the meantime I paired the remote control with another P3S. The aircraft is already fixed. When I turn it on, the gimbal makes the usual spin, the double bip sounds, the arms LEDs are blinking yellow and the pairing...