Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Vision Plus camera angled toward landing gear

Discussion in 'Phantom 2 Vision + Discussion' started by tdodge, Jul 20, 2014.

  1. tdodge

    Joined:
    Jul 20, 2014
    Messages:
    1
    Likes Received:
    0
    Hello, new here, nice to be here.

    So like so many others, I put my P2VP into a palm tree. :shock: long story short everything still works fine..except that the camera now instead of pointing directly ahead now is panned maybe 40 degrees to the right, so now the camera when on has a quarter of the frame filled with the landing gear.

    Please help me with any advice wether this is a calibration issue or something bent in the gimbal. I will post a picture as soon as Im able. Thank you in advance!
     
  2. npalen

    Joined:
    Mar 12, 2014
    Messages:
    532
    Likes Received:
    8
    Location:
    Kansas
    You might check the setscrew that holds the gimbal to the vertical shaft at the very top of the gimbal. You may be able to loosen that setscrew and rotate the camera back straight. Not sure, never tried it.
     
  3. Whippo

    Joined:
    Jul 21, 2014
    Messages:
    4
    Likes Received:
    0
    I have the same problem but only with one or two degrees. I Will test to fixit tomorrow and uppdate.