- Joined
- May 29, 2014
- Messages
- 843
- Reaction score
- 212
P3P: I've been using the auto channel select on the GO app for my video downlink and it ALWAYS stays on channel 20.... but recently I've been getting a dropped link right as I take off.. then my video freezes for a moment while it resets... then I have to hit video record again after the link re-establishes. Once in the air the link seems solid.
I'm using a stock Controller w/HDMI port back added.
I have watched the video downlink page and I have never seen it on any channel except 20.... and i keep having these drop outs/lost connection. Oh, I might mention during this whole time I'm getting full bars on the strength meter.
I decided to go to manual channel selection, switched to another channel (13) and no problems on the last three flights.
Why does the auto stay on ch 20? Shouldn't it "hop" to another channel if you are getting interference?
Any ideas?
I'm using a stock Controller w/HDMI port back added.
I have watched the video downlink page and I have never seen it on any channel except 20.... and i keep having these drop outs/lost connection. Oh, I might mention during this whole time I'm getting full bars on the strength meter.
I decided to go to manual channel selection, switched to another channel (13) and no problems on the last three flights.
Why does the auto stay on ch 20? Shouldn't it "hop" to another channel if you are getting interference?
Any ideas?