I did this mod awhile ago, (V2) and it works great.
The new Firmware allows for progressive gimbal tilt speed, so I used a PS3 joystick pot.
This pot is $2.99 here: http://www.miniinthebox.com/3d-repair-p ... product4-4
Remove the original pot from the controller, and solder 3 wires to go to the new pot. (I used 3 siamesed wires from an old IDE hard drive cable.)
Remove one pot and the pressure switch from the dual joystick pot.
I made a bracket from a tin can, and attached it all to the bottom of the controller.
Video of it working here: https://www.youtube.com/watch?v=7JyYDBNXpB4
The new Firmware allows for progressive gimbal tilt speed, so I used a PS3 joystick pot.
This pot is $2.99 here: http://www.miniinthebox.com/3d-repair-p ... product4-4
Remove the original pot from the controller, and solder 3 wires to go to the new pot. (I used 3 siamesed wires from an old IDE hard drive cable.)
Remove one pot and the pressure switch from the dual joystick pot.
I made a bracket from a tin can, and attached it all to the bottom of the controller.
Video of it working here: https://www.youtube.com/watch?v=7JyYDBNXpB4