I had to replace the Gimbal Mount Plate a few weeks ago (I'd 'fixed' it before with gorilla glue). Before I replaced the part I was getting a 1.5-2 miles (using the antenna mods on the RC). After replacing the mount, I did a quick and dirty test to make sure it could fly, but didn't check distance.
Now, I've tried in two different locations where I know the range was good, and I'm loosing RC signal at around 220 meters. I still have video, just no RC control.
I'm guessing I screwed up the RC antenna on the AC. Does anyone have a pic of an 'open' P3S with an arrow pointing to the radio antenna? I'm about 100 that it's on the AC, since that's the last thing I opened up.
Now, I've tried in two different locations where I know the range was good, and I'm loosing RC signal at around 220 meters. I still have video, just no RC control.
I'm guessing I screwed up the RC antenna on the AC. Does anyone have a pic of an 'open' P3S with an arrow pointing to the radio antenna? I'm about 100 that it's on the AC, since that's the last thing I opened up.