Rem Ctrl Booster (Mod) Completed, Sirius Booster v1.0
.
...Not another 'Franken-MOD', No Velcro, Ty-Raps, Wing-Nuts, Brackets or Wires, Plug-N-Play, takes approx 2min to setup and/or take dwn, I built it with sacrificial conn's, has gotten extremely windy here so haven't had a chance to give it a real test, but works like a charm...
.
.
.
..this particular system is equipped with Sunhans SHRC24G3WP Signal Boosters, with hard connections, in an inline configuration.. no excess wires or connections.. the connections from the booster housing are RP-SMA Female making the external connections sacrificial RP-SMA Male.. the signal booster properties are as follows: Output PWR 35dBm, Transmit Gain 15-18dBm, Receive Gain ≤12dBm, PWR Supply is a removable 7.4vDc 2500mAh Battery with a 25C rating.. with a current load of ≤600mAh that gives this system several hours of operation btwn charges while still holding the overall foot-print and weight to a minimum, the weight added is only 17.5oz with the Battery & Antenna.. the device itself can be installed or removed in 2min or less, and with a lil practice as quickly as 30sec.. it was produced using PLA on a 3D-Printer again making it plenty durable and light, total print time for the 4ea parts is approx 12hrs.. in this current version it has a 3digit LED battery voltage indicator, the next version will include a battery capacity indicator that can be upgraded by simply removing and snapping into place a the new battery compartment lid..
.
IIIDaemon
www.GasRecovery.net
.
...Not another 'Franken-MOD', No Velcro, Ty-Raps, Wing-Nuts, Brackets or Wires, Plug-N-Play, takes approx 2min to setup and/or take dwn, I built it with sacrificial conn's, has gotten extremely windy here so haven't had a chance to give it a real test, but works like a charm...
.
.
.
..this particular system is equipped with Sunhans SHRC24G3WP Signal Boosters, with hard connections, in an inline configuration.. no excess wires or connections.. the connections from the booster housing are RP-SMA Female making the external connections sacrificial RP-SMA Male.. the signal booster properties are as follows: Output PWR 35dBm, Transmit Gain 15-18dBm, Receive Gain ≤12dBm, PWR Supply is a removable 7.4vDc 2500mAh Battery with a 25C rating.. with a current load of ≤600mAh that gives this system several hours of operation btwn charges while still holding the overall foot-print and weight to a minimum, the weight added is only 17.5oz with the Battery & Antenna.. the device itself can be installed or removed in 2min or less, and with a lil practice as quickly as 30sec.. it was produced using PLA on a 3D-Printer again making it plenty durable and light, total print time for the 4ea parts is approx 12hrs.. in this current version it has a 3digit LED battery voltage indicator, the next version will include a battery capacity indicator that can be upgraded by simply removing and snapping into place a the new battery compartment lid..
.
IIIDaemon
www.GasRecovery.net
Last edited: