I've troubleshooted through the manual and can't seem to figure out why my drone won't take off. The compass is calibrated, the drone slowly flashes green, and then when I try to start up the drone, I get three shirt red lights.... Please help!
Red flashing 3 times
- Thread starter Hazendd
- Start date
Can you send screen shot of your phone?
Maybe rebar in the ground? If so put in on a box or find another grass field.
Damaged compass/GPS??
Something needs calibration??
Maybe rebar in the ground? If so put in on a box or find another grass field.
Damaged compass/GPS??
Something needs calibration??
Hi Hazendd
Sounds like you may need to calibrate the IMU. See this thread on RC Groups and look at Don26812's posts....
http://www.rcgroups.com/forums/showthread.php?t=2190385
Sounds like you may need to calibrate the IMU. See this thread on RC Groups and look at Don26812's posts....
http://www.rcgroups.com/forums/showthread.php?t=2190385
According to the LED list:
Flashing ALL red could be:
Low Voltage or Other errors
Calibration or other errors
In ATTI mode 1 yellow, 3 reds = less than 5 sats
In GPS mode 1 green, 3 reds = less than 5 sats
Flashing ALL red could be:
Low Voltage or Other errors
Calibration or other errors
In ATTI mode 1 yellow, 3 reds = less than 5 sats
In GPS mode 1 green, 3 reds = less than 5 sats
