Hey folks just got my new Phantom 4 and we are having difficulties getting the transmitter connecting properly with the drone,
The joy sticks appear to not be communicating with my drone. My son and I loaded all the firmware on my iPad Air and then took it out to do a couple pre flight checks. What we found was that the joysticks didn't connect with the drone.
For example, we tried to get it to activate and nothing happened until he hit the hover mode which I believe it worked as it activated the motors at a lower rpm. I then told him to throttle it up and when he did it throttled up at full rpm. Problem is we couldn't get it to shut off. We were at full throttle for 5 minutes until the Dji tech instructed us to do something....son can't recall what it was. Thankfully I had a firm grip on it or it would have been down on the Vegas strip!
Just wondering if any of you are having the same issues.....I'm sure there are other issues if we actually fly it. Any advice would be great.
We are new at this so we are newbies... THANKS ALL,
Sent from my iPad using PhantomPilots mobile app