Hi papa I did exactly how you described from your video and downloaded the djiupdate and the code seems to say its still in 17dbm what have I done wrong? I have the P3S and clicked 13channel option. I am also in Australia.
07:39
07:39 ============================================
07:39 Restart your RC & Aircraft and Enjoy New Mod
07:39 ============================================
07:39
07:39 Credit to: Ojcze Nasz, SingLag, Argonaise &
www.phantompilots.com
Disconnected.
Disconnecting.
07:38 File upload OKE
07:38 Checking file ...
07:38 Update djiled.sh on Aircraft
07:37 File upload OKE
07:37 Checking file ...
07:37 Update djiled.sh on RC
07:36 Final process ...
07:36 hmod 775 /sbin/watchlog.sh
/ #
07:36 c
07:36 chmod 775 /sbin/watchlog.sh
07:35 Supports VAPs: yes PHY name: phy0
/ #
07:35 winfo
wlan0 ESSID: "PHANTOM3_0b8dc9"
Access Point: 60:60:1F:0B:8D:C9
Mode: Master Channel: 2 (2.417 GHz)
Tx-Power: 17 dBm Link Quality: 70/70
Signal: -20 dBm Noise: -95 dBm
Bit Rate: 75.1 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan0.sta1 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Master (VLAN) Channel: 2 (2.417 GHz)
Tx-Power: 17 dBm Link Quality: 70/70
Signal: -15 dBm Noise: -95 dBm
Bit Rate: 78.0 MBit/s
Encryption: none
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
07:35 i
07:35 iwinfo
07:34
BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
07:34 Telnet ready ...
Connected.
Connecting to 192.168.1.1.
07:34 Aircraft Ready ...
07:34 RC Ready ...
07:17
07:17 Please proceed to STEP 2
07:17
07:16 File upload OKE
07:16 Checking file ...
07:16 Upload watchlog.sh to aircraft
07:15 File upload OKE
07:15 Checking file ...
07:15 Upload watchlog.sh to RC
07:14 File upload OKE
07:14 Checking file ...
07:14 Configure Telnet to Aircraft
07:13 File upload OKE
07:13 Checking file ...
07:13 Configure Telnet to RC
07:12 Aircraft Ready ...
07:12 RC Ready ...