These are my files. Use it as reference.
I think this is the final solution and I'm going to leave it like that. Last change I made was power mode from fixed to limit, the reason was transmitter on fixed was overheating the little wifi board inside the remote.
The iwinfo now shows:
wlan0 ESSID: "PHANTOM3_CENSORED"
Access Point: CENSORED
Mode: Client Channel: 2 (2.417 GHz)
Tx-Power: 27 dBm Link Quality: 70/70
Signal: -23 dBm Noise: -95 dBm
Bit Rate: 130.0 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
I'm really sorry for those who fried their emotes. I've modified my own about a 100 times in last 3 days. Never lost connection or anything .... I don't know. Don't use suspicious FTP clients maybe...
I use linux, I'm connecting to via mc (Midnight Commander) on Ubuntu.
The exact command I use to connect is :
mc ftp://root:
[email protected]
From there I'm able to tranfer files to and from remote connection straight to my local home folder.
To edit files I use gedit or nano.
Hope this helps.
T.