This is what your motors and props should look like.Yes, the motors are swap..only two. Maybe not original replacement, I feel more resistance when securing the props, I'm going to buy four other original motors. And new props.
We put the drone on the drum, but the drone wan`t vertical take off. Only sliding too right. I am affraid because here is only mountain with rocks, and I believe the drone don`t like it.
But in auto mode we can check it.
Are the correct props in use on each motor?
The props can only one way, left/right threat.
I am looking forward for solver this problem
Your props are all pitching in the same direction.
Glad you checked the items we have been telling you and likely found your issue.Yes, now I understand and see clearly the differents. My fault, it is the first drone in my life .....a Phantom.
Thank you very much, I will try and let to know.
This should correct the problem. I’ll look forward to hearing outcome.Yes, now I understand and see clearly the differents. My fault, it is the first drone in my life .....a Phantom.
Thank you very much, I will try and let to know.
Perhaps read through my list of tips for new P3A/P3P owners. Cheers!My fault, it is the first drone in my life .....a Phantom.
We have seen several examples of people putting the wrong props on P3 models regardless of threading. Thats why we suspected it as a possible issue so early in this thread even before he posted any photos.You can't put silver props where black props go or black props on silver threads are reversed..??
Yes I know because they were forced on, ordinarily you can't get them mixed up..We have seen several examples of people putting the wrong props on P3 models regardless of threading. Thats why we suspected it to be the issue so early in this thread.
The OP himself noted, "I install 4 props silver and I felt two are not smoothly tighten." The two which were more difficult to tighten down were very likely the two being forced on incorrect threading.
Great news to hear it’s now flying ?. A couple of late comers to this thread evidently didn’t read the entire thread before commenting. Everyone that responds to a post on this forum is doing their best to be informative, with the goal of solving the issue that the OP is experiencing. I commend everyone here ?Yes, yes....yes (x1000) we known, black props and silver. You just have to know! I have never seen this configuration with other drone`s before, black and silver props.
Maybe better: 1,2,3,4. or A,B,C,D you are never confused
Cheers, the Panthom fly`s great.