Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Phantom 2 with Gopro AVL58 screen flickering

Discussion in 'Phantom 2 Discussion' started by wimstrydom, Nov 19, 2014.

  1. wimstrydom

    Joined:
    Nov 19, 2014
    Messages:
    2
    Likes Received:
    0
    Hello everyone, this is my first post here. I recently bought a DJI Phantom 2 with Zenmuse H3-3D Gimbal. I attached an iOSD mini that I connected to the transmitter of the DJI AVL58 kit. On the other end I have the black pearl monitor from Flysight that has its own built in receivers. I have tried using either the AVL58 receiver and the built in receiver and in both cases I get a flickering/flashing effect on the video that I see through the monitor. I have replaced the ribbon connection between the GoPro and the Gimbal, this didn't resolve anything. I have tried every available channel to no avail.

    Please if anyone here knows something or has experience on this kind of problem any help would be greatly appreciated.

    Thank you.
     
  2. Fyod

    Joined:
    May 21, 2014
    Messages:
    684
    Likes Received:
    61
    Location:
    Central EU
    Have you tried outside? There might be a source interference near by.
     
  3. wimstrydom

    Joined:
    Nov 19, 2014
    Messages:
    2
    Likes Received:
    0
    I received some help on a different forum, turns out the monitor was set to PAL, and the Gopro is NTSC. Just had to switch the monitor mode.