- Joined
- May 10, 2014
- Messages
- 3,012
- Reaction score
- 522
Friend of mine has P3 advanced.
Went to update the firmware to latest yesterday.
It failed.
I went round today to have a look.
With no memory card in the drone, just beeps (no status marker lights, the camera LED flashes red / green).
The app will connect to the drone and under Ios shows status as normal BUT motors will not activate.
Under Android status shows camera needs updating.
Put in fresh SD card with firmware on.
The camera lights starts off green and then goes red/ green alternate flashing.
The status marker lights do NOT flash.
The esc's beep a constant Beep Beep, left it 15 mins, still the same beeping.
Tried this several times, same each time.
Any ideas please. ?
The log file is below.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.
========== 2016.12.28 17:17:23 =====================
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
========== 2016.12.28 17:24:50 =====================
Packet: P3S_FW_V01.10.0090.bin
========== 2016.12.28 17:26:38 =====================
Packet: P3S_FW_V01.10.0090.bin
========== 2016.12.28 17:28:52 =====================
Packet: P3S_FW_V01.10.0090.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
Went to update the firmware to latest yesterday.
It failed.
I went round today to have a look.
With no memory card in the drone, just beeps (no status marker lights, the camera LED flashes red / green).
The app will connect to the drone and under Ios shows status as normal BUT motors will not activate.
Under Android status shows camera needs updating.
Put in fresh SD card with firmware on.
The camera lights starts off green and then goes red/ green alternate flashing.
The status marker lights do NOT flash.
The esc's beep a constant Beep Beep, left it 15 mins, still the same beeping.
Tried this several times, same each time.
Any ideas please. ?
The log file is below.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.07.0060.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.
========== 2016.12.28 17:17:23 =====================
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
========== 2016.12.28 17:24:50 =====================
Packet: P3S_FW_V01.10.0090.bin
========== 2016.12.28 17:26:38 =====================
Packet: P3S_FW_V01.10.0090.bin
========== 2016.12.28 17:28:52 =====================
Packet: P3S_FW_V01.10.0090.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...