Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

P2VPlus with H3-3D 1.0 and GoPro 4 Hero Black

Discussion in 'Phantom 2 Vision + Discussion' started by Mako79, May 19, 2016.

  1. Mako79

    Joined:
    May 16, 2014
    Messages:
    3,413
    Likes Received:
    567
    Location:
    Sydney Australia
    Sounds like a Frankenstein of a machine.
    There is going be a very small window of users who have done this mod. It's the GoPro + H3-3D mod where you can still use the DJI Vision App.
    DJI Phantom 2 Vision+ Plus 2.4ghz Wifi Module - wiring diagram / camera connection - Page 17 - RC Groups

    This post is just to assist those that has the following and wish to use the DJI Vision App.
    Phantom 2 Vision Plus (v2 or v3).
    Zenmuse H3-3D 1.0 with the 30 pin Hero port connector or H4-3D with an ebay 30 hero port connector.
    GoPro Hero 4 silver/black.
    [​IMG]


    We all know that the P2V+ works with the Gopro 3 and 3+ via the Hero proprietary 30 pin Port. This has NEVER worked with the GoPro Hero 4 out of the box. GoPro disabled the rear port on the Hero 4 range and forced everyone to use the side USB port. This is fine but the USB Flex cable usually broke and it was hard to access the SD card.

    It has been said on other forums that if you attach a GoPro LCD bacpac that the 30 pin on Hero 4 will unlock the video out. This is true. I rented an LCD bacpac for $5 and tested it out.

    Results:

    [​IMG]

    [​IMG]