Ok, so here's the deal. I've been wanting to get a throttle return spring thing for my old SR6 controller for a while now. The shapeways lever sucks. It's horribly inaccurate, and nobody seems to want to part with their levers, so I bought what I thought was a compatible lever off ebay.
Well, turns out that this one is off a newer controller because the plug on this one is a single 6 wire plug with yellow/white/black coming off the left and right potentiometer and orange/red/brown off the up and down potentiometer.
The problem is that the old lever had two separate plugs, each with red/white/black wires coming off each potentiometer.
I'm crafty and quite good soldering, but I need somebody to enlighten me which wires from the newer lever would match up with the colors of the old one.
Any help would be appreciated.
Well, turns out that this one is off a newer controller because the plug on this one is a single 6 wire plug with yellow/white/black coming off the left and right potentiometer and orange/red/brown off the up and down potentiometer.
The problem is that the old lever had two separate plugs, each with red/white/black wires coming off each potentiometer.
I'm crafty and quite good soldering, but I need somebody to enlighten me which wires from the newer lever would match up with the colors of the old one.
Any help would be appreciated.