flyNfrank said:
Don't be surprised if it takes 3-6hrs just to do the controller alone.
Also keep in mind that you will not be able to enjoy any part until you have both the controller antenna and the antenna on the quad installed. Alot of people have made the mistake of just doing their controller antenna, and then run out to test only to find out the they now only fly maybe 500ft. That happens due to the antennas are no longer matched which is why I mentioned getting both antennas installed first. Good luck!
No worries in fitting the antennas itchybeard, what takes the time is scraping the resin off the stock tx cable. I was all done fitting the three in around one hour.
Not sure what you mean by the above flyNfank? I just installed the stage 2 kit from fpvlr but to the controller and wifi only, the phantom is still stock. I don't need any more distance because the furthest i go is about 2500ft which it has been doing from standard no problems, sometimes the fpv gets a bit laggy at this distance depending on location so i'm hoping for a more stable signal all in. Not flew it since installing the antennas, will see how it is at the weekend.