Not sure? (Specs on phone above in consolidated pic) ...but seems my phone is strong enough with enough elbow room after app install (dji go 4)
I can get rc and ac connected.
Here's how I have done it and what I encounter.
First I put phone in RC holder and connect phone and Rc with cable. Then I go to ap and open. It opens and after tapping equipment it shows a mavic
I change pic to a phantom pro 4 and turn on RC then power up AC. I tap enter equipment and I get " open dji go inspire 1"
I tried to change but won't so I just tap go fly after I see connected on app.
I can see on screen where camera is pointing with all diagnostics.
I do have message that says after tapping it"calibrating the vision sensor's with dji assistant on a pc or mac is recommended.
I know there are vids to help do this but could it just be that it is not sensing correct craft giving me the trouble?
Am I doing something wrong?
Here's the sequence I use with my P3P. Works every time.
- Turn on the remote controller
- Turn on the Phantom
- Wait ~30 seconds
- Connect the RC to mobile device
- Start DJI GO