jrharrison45 said:
Good point. I am just about to mount the ImmersionRC 600mw transmitter to my phantom and I don't want that getting too hot as I run my batteries down. Has anyone found any good threads on best places to mount the ImmersionRC to keep it cool and still have good reception?
there's really only 1 location for your transmitter, and that's on the underside of the main body behind the gimbal... a lot of us use outdoor double sided tape to secure the transmitter to the body. Don't mount the transmitter in the exact middle pointing straight back because then the antenna plug will get in the way of you being able to remove the battery.
If you want your Tx pointing straight back, at least shift it off to one side. Alternately you can mount it at a slight angle but make sure you keep the transmitter's antenna AWAY from the compass on the leg.
see this thread for a picture of that compass