If above info from 200v is not sufficient, try to tell us more: I have schematics, I have PCB board layouts, etc.. NO main board in any of our P2V3+ units match your pictures! There is NO big round thing on anything in our P2V3+ units that I recall....
Perhaps if you want confirmation, you should put a picture of the whole board you are concerned with here? My main board has a wireless module on it, but nothing big and round as you show as I can recall...
yorlik,
The round thing is the GPS board, just shown for reference on how hard it landed.
Look at the top 2 photos, on the black main PCB you'll see a missing component, that went between to 2 large, silver, horizontal rectangles.
the pcb layout and component layout is on this site somewhere.... here is some info...
it is indeed an inductor, marked 6.8uH....
If it was mine, I would put a jumper wire across it and see if the rest of the drone worked; a 6uH inductor is small enough to not be required for test purposes....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.