- Joined
- Jun 3, 2017
- Messages
- 133
- Reaction score
- 16
- Age
- 37
This setup will get 3 mile easy in optimal conditons/environment it's also great for boosting your signal in those areas with too much interference! I will list the parts and links along with detailed instructions so you can purchase this too if you wish! The best part is you don't have to buy it all at once if you're a little strapped for cash. So anyways...
First you will need to get argtek, you could use itlite dbs mod too but I prefer the no holes method.
https://www.amazon.com/BlueProton-P...031&sr=8-2&keywords=argtek+phantom+3+standard
This is the 5.8ghz booster for the center antenna.
https://www.amazon.com/Sunhans-Wifi...qid=1514416098&sr=8-1&keywords=5.8ghz+sunhans
These are the 2.4ghz boosters for the side antennas, there's some controversy on whether or not you need 2 but that's what I used.
https://www.amazon.com/gp/product/B00RX5X36I/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Now you will need something to attach it to the argtek mounting rail, unfortunatley they only come in a 2 pack so buy 2.
https://www.amazon.com/gp/product/B00XZSCCT6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Ok, so now your boosters are attached to the mounting rail and the antennas are connected so the next thing is this.
https://www.amazon.com/gp/product/B016M46E16/ref=oh_aui_detailpage_o07_s03?ie=UTF8&psc=1
Then you will need these little guys to connect the dc cord to the boosters.
https://www.amazon.com/gp/product/B00UJ9AO4O/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
If you're asking yourself "how am I going to power this bad boy" here's your solution.
https://www.amazon.com/gp/product/B00ME3ZH7C/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Ok so now you need this adapter to make the cord compatible with the power source.
https://www.amazon.com/gp/product/B00B1JLN28/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
And last but not least this to secure the power source to the RC.
https://www.amazon.com/gp/product/B0010HADEA/ref=oh_aui_detailpage_o07_s03?ie=UTF8&psc=1
There it is folks, I hope you enjoy!
First you will need to get argtek, you could use itlite dbs mod too but I prefer the no holes method.
https://www.amazon.com/BlueProton-P...031&sr=8-2&keywords=argtek+phantom+3+standard
This is the 5.8ghz booster for the center antenna.
https://www.amazon.com/Sunhans-Wifi...qid=1514416098&sr=8-1&keywords=5.8ghz+sunhans
These are the 2.4ghz boosters for the side antennas, there's some controversy on whether or not you need 2 but that's what I used.
https://www.amazon.com/gp/product/B00RX5X36I/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Now you will need something to attach it to the argtek mounting rail, unfortunatley they only come in a 2 pack so buy 2.
https://www.amazon.com/gp/product/B00XZSCCT6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Ok, so now your boosters are attached to the mounting rail and the antennas are connected so the next thing is this.
https://www.amazon.com/gp/product/B016M46E16/ref=oh_aui_detailpage_o07_s03?ie=UTF8&psc=1
Then you will need these little guys to connect the dc cord to the boosters.
https://www.amazon.com/gp/product/B00UJ9AO4O/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
If you're asking yourself "how am I going to power this bad boy" here's your solution.
https://www.amazon.com/gp/product/B00ME3ZH7C/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Ok so now you need this adapter to make the cord compatible with the power source.
https://www.amazon.com/gp/product/B00B1JLN28/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
And last but not least this to secure the power source to the RC.
https://www.amazon.com/gp/product/B0010HADEA/ref=oh_aui_detailpage_o07_s03?ie=UTF8&psc=1
There it is folks, I hope you enjoy!