- Joined
- Jun 13, 2015
- Messages
- 489
- Reaction score
- 98
- Age
- 52
Hi
I was out fly at sea today. I'm guessing the wind was probably about 15 -17 mph behind the p3a on the way out. I was out to about 1.5 miles. I did some flying around ships for a while. My p3a initiated RTH at 39% battery and got home with 23% in the tank flying into the wind. It did the same on all 3 batteries. My RTH is set at 25% in the settings.
So, my question is does Litchi dynamically adjust the RTH battery setting based on distance and battery used to get there?
Thanks
Phil
I was out fly at sea today. I'm guessing the wind was probably about 15 -17 mph behind the p3a on the way out. I was out to about 1.5 miles. I did some flying around ships for a while. My p3a initiated RTH at 39% battery and got home with 23% in the tank flying into the wind. It did the same on all 3 batteries. My RTH is set at 25% in the settings.
So, my question is does Litchi dynamically adjust the RTH battery setting based on distance and battery used to get there?
Thanks
Phil