Hello all
I bought a lightbridge for my naza drone a couple of months ago. Because of poor range, I installed two hobbyking 2W amps on ground unit : things got worse, video got pixellated even at close range.
The best configuration I found is to have one amp on air unit : gives about 1.5 kms of "good quality" range.
However, 1.5 kms still is a bit weak. Therefore I'm looking for some better quality boosters, here are some units I found interresting.
- sunhans 3W
REXUAV | HOME
- rex uav 4W
REXUAV | HOME Appearently not a great choice according to this thread
Sunhans 3W vs FPVLR 4W
- cheap 4W booster
Alibaba Manufacturer Directory - Suppliers, Manufacturers, Exporters & Importers
couldn't find anything about it
Something else ? Here is an interresting rcgroups thread:
dji lightbridge modifications TX-power/RX sensitivety - RC Groups
According to this guy, it doesn't make sense to install boosters on lightbridge ground unit, it appears however to be fine to install amplifiers on air unit. This would be consistent with my previous results.
I tried to find a booster designed for mimo systems; I found something from sunhans :
SUNHANS - 2.4GHz WiFi MIMO Booster, 1000mW, 300Mbps
Unfortunately it appears to be only two regular boosters packed up in a single box : not interesting.
I've also seen some "dual band booster" :
REXUAV | HOME
not sure what this is about.
I don't plan to improve antennas now ( will do it once I get decent omni range).
I see that a lot of people mess with boosters on their phantom and inspire units, therefore I guess it should be possible to get a decent setup.
If any of you guys has some advice, I'd be happy to read it.
Thanks
I bought a lightbridge for my naza drone a couple of months ago. Because of poor range, I installed two hobbyking 2W amps on ground unit : things got worse, video got pixellated even at close range.
The best configuration I found is to have one amp on air unit : gives about 1.5 kms of "good quality" range.
However, 1.5 kms still is a bit weak. Therefore I'm looking for some better quality boosters, here are some units I found interresting.
- sunhans 3W
REXUAV | HOME
- rex uav 4W
REXUAV | HOME Appearently not a great choice according to this thread
Sunhans 3W vs FPVLR 4W
- cheap 4W booster
Alibaba Manufacturer Directory - Suppliers, Manufacturers, Exporters & Importers
couldn't find anything about it
Something else ? Here is an interresting rcgroups thread:
dji lightbridge modifications TX-power/RX sensitivety - RC Groups
According to this guy, it doesn't make sense to install boosters on lightbridge ground unit, it appears however to be fine to install amplifiers on air unit. This would be consistent with my previous results.
I tried to find a booster designed for mimo systems; I found something from sunhans :
SUNHANS - 2.4GHz WiFi MIMO Booster, 1000mW, 300Mbps
Unfortunately it appears to be only two regular boosters packed up in a single box : not interesting.
I've also seen some "dual band booster" :
REXUAV | HOME
not sure what this is about.
I don't plan to improve antennas now ( will do it once I get decent omni range).
I see that a lot of people mess with boosters on their phantom and inspire units, therefore I guess it should be possible to get a decent setup.
If any of you guys has some advice, I'd be happy to read it.
Thanks