Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Help

Discussion in 'Phantom FC40 Discussion' started by Carlo Napoli, May 1, 2016.

Tags:
  1. Carlo Napoli

    Joined:
    Apr 18, 2016
    Messages:
    167
    Likes Received:
    4
    Hi I need a help in hand I have a 4.0 multistar battery 4000 mah 3s 11.1v
    Now I have a buzzer but it won't go up to any more than 3.9 volts then off what do I set this to ?
    Also in NAZA it was sett to 11.4 first point of battery going dead I've change it to 10.4 but I'm worried as my battery is not 2200 standard phantom battery
     
  2. Mircea78

    Joined:
    Jan 8, 2016
    Messages:
    16
    Likes Received:
    7
    Hi, try to put the settings from Mike's video: . It worked for me very well. 13 minutes. FC40, multistar 4000 lipo, full load: gimbal, gopro, tx, fpv flight controller n1 osd.
     
    Carlo Napoli likes this.
  3. Carlo Napoli

    Joined:
    Apr 18, 2016
    Messages:
    167
    Likes Received:
    4
    Hi buddy that's far to low today 18 min 19 min first flash of red and buzzer @ set at 3.5 v
    But I run my camera off battery built in not my aircraft .
    But thanks for the reply .
     
    Lasernerd likes this.