Hello All,
Hoping I can get some help here, going crazy!
My P3A randomly (with no App or Firmware updates or Hard Landings) thinks it's a P3P in the DJI GO App, so it fly's but no camera; though, I can still control the gimbal with camera facing up or down with the remote. The gimbal is also level and calibrated.
I have re-installed the DJI GO App, re-installed the firmware (from scratch - log attached), re-synced the remote and aircraft, and everything in between.
I CAN get it to work when I turn the aircraft on with a fresh .bin file of firmware; though, after I shutdown and reboot, it goes back to the SAME PROBLEM. The the indicator lights on the aircraft flash yellow while the battery button flashes red, all while the aircraft fails to shutdown without manually removing the battery.
Try again with a fresh firmware check, works, reboot, same problem...repeat! ...HELP!
[BASIC] -- Log Text File Copy and Pasted Below
[DETAILED] -- MISC > LOG File Attached
------------------------------LOG FILE---------------------------
========== 2014.01.01 00:05:10 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Success.
========== 2017.10.27 16:45:50 =====================
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
Hoping I can get some help here, going crazy!
My P3A randomly (with no App or Firmware updates or Hard Landings) thinks it's a P3P in the DJI GO App, so it fly's but no camera; though, I can still control the gimbal with camera facing up or down with the remote. The gimbal is also level and calibrated.
I have re-installed the DJI GO App, re-installed the firmware (from scratch - log attached), re-synced the remote and aircraft, and everything in between.
I CAN get it to work when I turn the aircraft on with a fresh .bin file of firmware; though, after I shutdown and reboot, it goes back to the SAME PROBLEM. The the indicator lights on the aircraft flash yellow while the battery button flashes red, all while the aircraft fails to shutdown without manually removing the battery.
Try again with a fresh firmware check, works, reboot, same problem...repeat! ...HELP!
[BASIC] -- Log Text File Copy and Pasted Below
[DETAILED] -- MISC > LOG File Attached
------------------------------LOG FILE---------------------------
========== 2014.01.01 00:05:10 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Success.
========== 2017.10.27 16:45:50 =====================
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:10 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.