- Joined
- Aug 26, 2014
- Messages
- 10
- Reaction score
- 0
My setup has the Zenmuse H3-3D, Immersion RC, and mini iOSD with a Black Pearl monitor.
I've checked, double checked, and triple checked my wiring. It's all correct. However, I still get no video. All the telemetry shows up, so it is broadcasting, but no video, just telemetry on black.
I replaced the USB Ribbon cable to my GoPro, since from all my research here, that's usually the culprit, and the original one did look a bit worn, but that didn't solve it.
Is there any way to disassemble the gimbal to check the other ribbon cables? I'm at a total loss for what could be causing this. It's driving me nuts.
I should note that my OSD video has never worked. I assembled the whole thing brand new out of the box, and it didn't work, but only recently replaced the USB ribbon cable.
Thanks if anyone magically knows the solution.
-Cary
I've checked, double checked, and triple checked my wiring. It's all correct. However, I still get no video. All the telemetry shows up, so it is broadcasting, but no video, just telemetry on black.
I replaced the USB Ribbon cable to my GoPro, since from all my research here, that's usually the culprit, and the original one did look a bit worn, but that didn't solve it.
Is there any way to disassemble the gimbal to check the other ribbon cables? I'm at a total loss for what could be causing this. It's driving me nuts.
I should note that my OSD video has never worked. I assembled the whole thing brand new out of the box, and it didn't work, but only recently replaced the USB ribbon cable.
Thanks if anyone magically knows the solution.
-Cary