- Joined
- Jun 7, 2014
- Messages
- 1
- Reaction score
- 0
Hi Guys,
I just recently got my DJI Phantom 2 from DSLRPROS.com
I got the Toronto Cinema Edition P2 Aerial Kit - http://www.dslrpros.com/dslrpros-produc ... d-301.html
DJI Phantom 2 Go Pro Aerial Rig
DJI Zenmuse H3-3D Gimbal (3-Axis gimbal pre-installed and tuned)
DJI Self-Tightening 9" Props (set of 4)
DSLRPros 9" Carbon Fiber CF Props (set of 4)
DSLRPros 9" Prop Guards
Deluxe DSLRPros Radio Tx Lanyard
2 Total DJI OEM 5200 mAH LiPo Batteries
1 Total DJI Flight Pack Charging Block
DSLRPros P2 Tough Case with pre-cut foam
Integrated 5.8 GHz Long Range Diversity FPV System (7" HD Field Monitor, Long Range Diversity Rx/Tx, Pole/Panel Antenna)
DSLRPros Fire Safe LiPo Guard Bag
It works great but I cant get much range on the FPV side. Even though I have the long range diversity FPV system.
I have a feeling its either the antenna setup or the FPV Monitor settings.
So on the antenna setup I have:
1x 5.8 GHz antenna connected to the drone.
FPV Monitor.
1x 5.8 GHz antenna
1x Panel Wifi antenna. 2.4ghz/ 8dBi 5800 5.8ghz/11dBi
Now this is where I am having issues.
Which antennas should I be putting where - in the drone and in the monitor?
I have in the kit:
3x 5.8 GHz antennas
1xRX cloverleaf antenna
1xTX cloverleaf antenna
1x Panel Wifi antenna. 2.4ghz/ 8dBi 5800 5.8ghz/11dBi
Which settings should I be using on the FPV? its a black pearl lcd monitor.
If anyone has tips on where to start and which settings to use that would be great!
Regards,
Matt
I just recently got my DJI Phantom 2 from DSLRPROS.com
I got the Toronto Cinema Edition P2 Aerial Kit - http://www.dslrpros.com/dslrpros-produc ... d-301.html
DJI Phantom 2 Go Pro Aerial Rig
DJI Zenmuse H3-3D Gimbal (3-Axis gimbal pre-installed and tuned)
DJI Self-Tightening 9" Props (set of 4)
DSLRPros 9" Carbon Fiber CF Props (set of 4)
DSLRPros 9" Prop Guards
Deluxe DSLRPros Radio Tx Lanyard
2 Total DJI OEM 5200 mAH LiPo Batteries
1 Total DJI Flight Pack Charging Block
DSLRPros P2 Tough Case with pre-cut foam
Integrated 5.8 GHz Long Range Diversity FPV System (7" HD Field Monitor, Long Range Diversity Rx/Tx, Pole/Panel Antenna)
DSLRPros Fire Safe LiPo Guard Bag
It works great but I cant get much range on the FPV side. Even though I have the long range diversity FPV system.
I have a feeling its either the antenna setup or the FPV Monitor settings.
So on the antenna setup I have:
1x 5.8 GHz antenna connected to the drone.
FPV Monitor.
1x 5.8 GHz antenna
1x Panel Wifi antenna. 2.4ghz/ 8dBi 5800 5.8ghz/11dBi
Now this is where I am having issues.
Which antennas should I be putting where - in the drone and in the monitor?
I have in the kit:
3x 5.8 GHz antennas
1xRX cloverleaf antenna
1xTX cloverleaf antenna
1x Panel Wifi antenna. 2.4ghz/ 8dBi 5800 5.8ghz/11dBi
Which settings should I be using on the FPV? its a black pearl lcd monitor.
If anyone has tips on where to start and which settings to use that would be great!
Regards,
Matt