Looking for some assistance please. Received my Flytrex Core 2 this morning so fitted using the supplied DJI Y cable. All checked, connections OK. Put her back together then took a trip to check out a maiden Flytrex mission.
Powered everything up but 2 problems.
1. No GPS lock at all. Single green plus 3 x red flashes. Left her for 10 minutes. Nothing. Nada.
2. My Android tablet was unable to connect to the camera despite being connected to the Phantom wifi.
Not had anything like this before and stumped why the simple install of a Flytrex unit should cause this. Just brought her home, opened her up again and checked all the connections. All spot on. Still zero GPS lock. Strange thing is the rear lights flash green 10 times indicating home lock but unable to get any satellite lock. Stumped how she can indicate home lock if she is unable to lock on to a single satellite.
Stumped. Any advice?
PS I am now just opening her up again to remove the Flytrex and check with normal GPS received connection. Damned annoying. Wondering if maybe the supplied cable is faulty.
Powered everything up but 2 problems.
1. No GPS lock at all. Single green plus 3 x red flashes. Left her for 10 minutes. Nothing. Nada.
2. My Android tablet was unable to connect to the camera despite being connected to the Phantom wifi.
Not had anything like this before and stumped why the simple install of a Flytrex unit should cause this. Just brought her home, opened her up again and checked all the connections. All spot on. Still zero GPS lock. Strange thing is the rear lights flash green 10 times indicating home lock but unable to get any satellite lock. Stumped how she can indicate home lock if she is unable to lock on to a single satellite.
Stumped. Any advice?
PS I am now just opening her up again to remove the Flytrex and check with normal GPS received connection. Damned annoying. Wondering if maybe the supplied cable is faulty.