Bumped into a building today and only real damage I see so far is the camera broke off the gimbal along with the ribbon type wire. Plus cracked 1 corner of the gimbal mount ( that's attached to the a/c). I'd like to test the motors but the R/c won't connect to the a/c. Have strong wifi signal, but will not start motors. Aircraft lights stay in self test- red/green/yellow sequence. I still get tone at a/c power up, but no motor action. And I must admit, it was pilot error, and a VERY hard hit. Also, status light on r/c staying red. Any advice welcome. Thanks.
Sent from my iPad using PhantomPilots mobile app
Sent from my iPad using PhantomPilots mobile app