Question on up date after reading PDF instructions with 1.2.6, update.
After reading item 2 below,
Do you have to have the air craft powered on for the camera to make this beeping sound,
or will it get its needed power from just having the battery in place on the P3.
It does not say any thing about powering on the air craft while up dating the
controller.
Step 3- Update the Remote Controller
1. Power on the remote controller and wait 60 seconds until the upgrade begins. Do not power off the remote controller during the update.
2. It will take approximately 10 minutes to complete the firmware update. The camera will sound a beeping sound and the Status LED on
the remote controller shows solid blue to indicate the update is in progress. The Status LED on remote controller shows solid green and
beeping sound will stop if the upgrade is completed with success. The Status LED on remote controller shows solid red if upgrade is failed
Thanks for help with my question.
After reading item 2 below,
Do you have to have the air craft powered on for the camera to make this beeping sound,
or will it get its needed power from just having the battery in place on the P3.
It does not say any thing about powering on the air craft while up dating the
controller.
Step 3- Update the Remote Controller
1. Power on the remote controller and wait 60 seconds until the upgrade begins. Do not power off the remote controller during the update.
2. It will take approximately 10 minutes to complete the firmware update. The camera will sound a beeping sound and the Status LED on
the remote controller shows solid blue to indicate the update is in progress. The Status LED on remote controller shows solid green and
beeping sound will stop if the upgrade is completed with success. The Status LED on remote controller shows solid red if upgrade is failed
Thanks for help with my question.