- Joined
- Dec 28, 2015
- Messages
- 7
- Reaction score
- 4
- Age
- 40
Our drones are all painted by hand using high quality Iwata airbrushes with a high quality polymer finish called Duracoat.
What makes Duracoat a great finish for all Drone's is that it is a hardened polymer paint can be reduced and applied to the drone extremely thin yet remain durable and wear resistant. This very thin yet durable finish is important is because it keeps your drone LIGHT WEIGHT adding almost no weight to the drone and at the same time causing NO interference with the GPS, COMPASS, or any other communication with the drone.
Duracoat is NOT a flash cure application which will become brittle and prone to flaking. Duracoat cures slowly so it remains flexible after it cures attributing to its extreme wear resistance and can resist up to 100 inch pounds of direct impact. DuraCoat is available in over 250 standard colors and It can be applied to just about any surface such as metal, plastic and wood as long as the surface is properly prepared.
We use the highest technology for surface preparation to ensure a proper application.
My name is David and If you are interested in having your drone painted please contact on a PM or email me.
Sent from my iPhone using PhantomPilots mobile app
What makes Duracoat a great finish for all Drone's is that it is a hardened polymer paint can be reduced and applied to the drone extremely thin yet remain durable and wear resistant. This very thin yet durable finish is important is because it keeps your drone LIGHT WEIGHT adding almost no weight to the drone and at the same time causing NO interference with the GPS, COMPASS, or any other communication with the drone.
Duracoat is NOT a flash cure application which will become brittle and prone to flaking. Duracoat cures slowly so it remains flexible after it cures attributing to its extreme wear resistance and can resist up to 100 inch pounds of direct impact. DuraCoat is available in over 250 standard colors and It can be applied to just about any surface such as metal, plastic and wood as long as the surface is properly prepared.
We use the highest technology for surface preparation to ensure a proper application.
My name is David and If you are interested in having your drone painted please contact on a PM or email me.
Sent from my iPhone using PhantomPilots mobile app