- Joined
- Mar 19, 2017
- Messages
- 5
- Reaction score
- 1
- Age
- 36
So while flying today I was about 15ft away from a building and a gust of wind blew my P4P into a stone wall (it really wasn't that windy out, just had a big gust). So long story short my P4P came crashing down to the ground and the battery poped out of the drone.
Damage to the drone is the back right landing gear is clearly broken off, wire inside that landing gear going from the senor down to the circuit board is ripped off at the board. Front of the two land gears are missing the plastic covers where the circuit board is located. Also there is a few minor hairline paint chips around the gimbal but I'm not worried about that now. So should I send it back to DJI for repair or see if I can find 2 new landing gear. I haven't tried taking off again after the crash but I powered the craft on and everything seems to be working on the app and the gimbal is still feeding back video.
Damage to the drone is the back right landing gear is clearly broken off, wire inside that landing gear going from the senor down to the circuit board is ripped off at the board. Front of the two land gears are missing the plastic covers where the circuit board is located. Also there is a few minor hairline paint chips around the gimbal but I'm not worried about that now. So should I send it back to DJI for repair or see if I can find 2 new landing gear. I haven't tried taking off again after the crash but I powered the craft on and everything seems to be working on the app and the gimbal is still feeding back video.
Last edited: