- Joined
- Aug 12, 2016
- Messages
- 11
- Reaction score
- 0
- Age
- 32
My Phantom 3 standard suffered a relatively violent crash where the whole gimbal broke from the body. I reconnected the gimbal and checked the rest of the drone, it flies fine and at first shot video and had no trouble.
But in the first few flights it had progressively worsening issues with losing the image transmission signal, and now, if you power it up you might at most get a couple seconds before the signal vanishes again.
I've tried the various techniques to fix normal transmission issues to no avail, so I'm thinking the board in the board in the gimbal is to badly damaged?
But in the first few flights it had progressively worsening issues with losing the image transmission signal, and now, if you power it up you might at most get a couple seconds before the signal vanishes again.
I've tried the various techniques to fix normal transmission issues to no avail, so I'm thinking the board in the board in the gimbal is to badly damaged?