- Joined
- Nov 3, 2013
- Messages
- 276
- Reaction score
- 0
Hi I normally post in the Vision section (because thats what I have) but one of my co-workers bought a P1 and wants to get this cheap gimbal he ordered on ebay to work. We do have power to it and the stabilization works great. However the directions are BRUTAL! They only show one picture of where the cables attach to the NAZA-M-V2 (in f2 port) and its in black and white and a side shot photo copy at that.
The cable/wires they gave us are a generic set that has 4 separate wires ranging from brown to yellow. In the directions it seems to say that you only need three..which make some sense since there is only three in a row on f2 where a servo cable could plug in.
We have updated his software in the assistant software. All up to date.
We have enable the gimbal switch (which his controller did come with)
We have tried many combinations (nervously) and none have worked..not even a bit.
What I am hoping that one of the P1 Gurus can shed some light. I feel like we are just missing one small thing. Attached is a picture of the Gimbal which is supposed to be plug and play. There seems to be very little info on this cheap generic gimbal..no website etc..just the poorly translated photocopies that were sent with it.
Any help is very much appreciated.
James (and Mike)
The cable/wires they gave us are a generic set that has 4 separate wires ranging from brown to yellow. In the directions it seems to say that you only need three..which make some sense since there is only three in a row on f2 where a servo cable could plug in.
We have updated his software in the assistant software. All up to date.
We have enable the gimbal switch (which his controller did come with)
We have tried many combinations (nervously) and none have worked..not even a bit.
What I am hoping that one of the P1 Gurus can shed some light. I feel like we are just missing one small thing. Attached is a picture of the Gimbal which is supposed to be plug and play. There seems to be very little info on this cheap generic gimbal..no website etc..just the poorly translated photocopies that were sent with it.
Any help is very much appreciated.
James (and Mike)