Can not update bird or batteries

[aka1ceman]

SOLVED

I get long Beeeeep, no solid green light. Tried format card, etc.
Tried multiple times to restart bird after long beep
DJI Go states still needs update


Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

 

[Reed L]

Was this with the 16gig sd card that came with it? If not, try a different sd card

 

[aka1ceman]

yes it was the card that came in it. Brand new not yet even flown.

 

[aka1ceman]

See if this helps...

 

[aka1ceman]

Was this with the 16gig sd card that came with it? If not, try a different sd card

Tried different card, still no luck.

 

[advhawk]

That's normal if the upgrade process is stopped just let it beep takes about a half hour or so of the painful noise

 

[aka1ceman]

That's normal if the upgrade process is stopped just let it beep takes about a half hour or so of the painful noise

Even after the solid red light on the gimbal and solid beep sound? I understood that was a sign of failure.

 

[barefootbeachcombing]

Have you checked the status text file on the card?

 

[aka1ceman]

Have you checked the status text file on the card?

See P3x file above... I attached it here to see if someone can make tails from it.

 

[aka1ceman]

1 day old never flown. I took it back to the shop/dealer I purchased it from and after they said diagnosed it had a hardware issue. Swapped it for another and said they would deal with dji on that unit. Thank God for good dealers..
Thank you 1UAS in Riverdale, Maryland.