Boscam rx/ DJI Phantom 1.1.1 fpv interference issue

[JH_PiNoY]

I have recently bought a Phantom 1.1.1. I decided to install an fpv system with the quad. I have a 5.8g R5800x and a 400 mw all from HobbyWireless.com. Long story short, I found out that the moment I turn on my DJI tx, I get horizontal lines on my monitor, which suggest an interference. Any suggestions to fix the issue?

 

[JH_PiNoY]

400 mw vtx
transmitter http://hobbywireless.com/58-ghz-tra...plug-playtransmitter-wires-txv584f-p-826.html

Vrx
http://hobbywireless.com/58-ghz-rec...e-high-sensitivity-receiver-f-band-p-407.html

Dji Phantom 1.1.1
From B&H Photo

 

[noiseboy72]

Not uncommon. You may find moving the monitor a little can help, but I find once flying, they are not a big issue at all.