When I got my P3 I duly updated the firmware. All went fine and actually updated in around two minutes.
I've just gone to update to 1.1.9 and had a bit of a problem. I was getting the D-D-D-D fine. The P3 made the startup bleeps several times over a ten minute period and then the camera switched off (swiveled down) and the LED's switched off. The D-D-D-D continued for another five minutes and then just stopped. Not the DD-D that you are supposed to get when done. I read the SD card and got this:
========== 2014.01.01 00:00:14 unsynchronized ======
Packet: P3S_FW_V01.01.0009.bin
Upgrading ...
ooh I thought, thats not good. So I put the SD card back in and started her up. She started fine, without going into firmware update. The App shows current firmware 1.1.9 and everything seems fine. I checked the SD card again and now I got:
========== 2014.01.01 00:00:14 unsynchronized ======
Packet: P3S_FW_V01.01.0009.bin
Upgrading ...
========== 2014.01.01 00:00:12 unsynchronized ======
Packet: P3S_FW_V01.01.0009.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
So has the firmware upgraded ok or should I be worried?
Also, is this firmware for the bird only? I tried updating the controller and get the 'identical or older' message.
Thanks
I've just gone to update to 1.1.9 and had a bit of a problem. I was getting the D-D-D-D fine. The P3 made the startup bleeps several times over a ten minute period and then the camera switched off (swiveled down) and the LED's switched off. The D-D-D-D continued for another five minutes and then just stopped. Not the DD-D that you are supposed to get when done. I read the SD card and got this:
========== 2014.01.01 00:00:14 unsynchronized ======
Packet: P3S_FW_V01.01.0009.bin
Upgrading ...
ooh I thought, thats not good. So I put the SD card back in and started her up. She started fine, without going into firmware update. The App shows current firmware 1.1.9 and everything seems fine. I checked the SD card again and now I got:
========== 2014.01.01 00:00:14 unsynchronized ======
Packet: P3S_FW_V01.01.0009.bin
Upgrading ...
========== 2014.01.01 00:00:12 unsynchronized ======
Packet: P3S_FW_V01.01.0009.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
So has the firmware upgraded ok or should I be worried?
Also, is this firmware for the bird only? I tried updating the controller and get the 'identical or older' message.
Thanks