Recent content by ted marsh

Hi, you have to sign up to be a member, if you have done sorry, then go to the part of the site you want to post on I.E: phantom 1 or 2 etc, you should then see a tab saying create a post or create a thread, click on that and then type in your question or query, am out at the moment but when I...

HI all, thank you for all the help offered, I have bought a new TX, calibrated and connected and have had my first flight, that was a rush, I took the old TX apart and it looks like the motherboard is dead, have reading going in but nothing coming out, so will strip for spare parts, thank you...

Hi, they have agreed to replace the TX and do not want this one returning so I will open check connections and solder joints, thank you

Hi, yes all checked full power test on batteries and inserted correctly, you have confirmed what I expected, luckily the person that sold it will replace the TX, just have to wait until father in law comes back from Russia and Latvia, thank you very much, Ted

hi, turned it on, it did not connect to the drone, so tried to connect by pushing the button inside the battery compartment, red LED lashed then went solid red, I then connected to my PC started the nazam assist, tried to configure the handset, which went ok, then tried to reconnect to the drone...

Hi, software version is: 4.02 same as yours, yes is new my father in law bought it for me from Latvia as he is Latvian, have tried several sets of batteries and all connections have been cleaned, Ted

Hi, thank you, the transmitter is doing nothing, i connected to my PC, DJI Nazam assistant, it stated i needed to update the firmware, which I told it to do, about 20% in it stated firmware update failed do a power recycle, I did this, then noticed there was no green LED light on the...

Hi, wonder if anybody can help. just bought a new P1, got it out of the box, charged the battery and put new AA batteries into the remote control, connected the remote and drone to my PC to check software, it stated needed to update so told it to carry on and update, it then said update failed...

Hi, thank you all for the help offered, I have found the problem, 2 broken cables, replaced and now have a happy brother-in-law, thanks again, a great forum, and I am now going out to buy one for myself. Ted

Hi, yes done what you say, but no joy. Ted

Hi, via USB, direct to PC, cannot hook up to RC assist, but can hook up to PC assist, have updated firmware, have done advanced IMU calibration and compass calibration, but still not going in to flight mode or if it is its not responding to the RC, sometimes when i boot the Phantom I get red and...

Hi, thanks for the reply, the light sequences the Phantom is omitting are: front to 3 red and 1 green, the rear two are one red, but beeping all the time,, i have found the user manual and downloaded it but I have a black laser printer, so no colours in the diagrams, also, yes the pairing light...

Hi, My friend has asked me to look at his Phantom 2 as he cannot get it to fly, so this is what I have done so far, charged batteries, replaced batteries in RC, turned on the phantom, lights flash orange and red, lots of beeping that does not stop sometimes the orange ones go green but still...