Recent content by csfanos

I live out in Issaquah with my P2 - would like to start hitting some local spots now that the weather is getting nicer - mostly just stuff around my neighborhood (nothing fancy for sure) - https://www.youtube.com/playlist?list=PLNxXg7KyPxW2TFqmU76xy8RiT8LrmvXOt

20% off for anyone who was on the fence about getting one http://www.flytrex.com/get-live-3g/FBSP ... ign=fb1009

You need an upgrade :-) From the DJI download page Phantom 2 Assistant Software v3.8 * Download the Firmware via Assistant software. Mac OS X 10.9 or above.

All the links for the RX-5802 are the black model - I'd love to get the white one that @mendezl has pictured but I can't seem to find a good link for it. Any good suggestions?

Thanks @Mako79 - that fixed it! @hellhole: the setting you need to change is Advanced -> Gimbal tab. My vertical limit was set far to the left at -30. I moved it over to +15 and now the camera will point straight ahead. Hope that works for you

During startup, the gimbal will point the camera straight ahead and straight down (and do some of the other wiggles), but after completion, the camera is pointing (at best) at 45 degrees down-angle. Turning the thumbwheel won't take it close to pointing straight ahead. I've run this through...

It physically won't move I've plugged the zenmuse cable into the port in the top/back - that part seems correct as I can get responses from it via the calibration software. Yes, it has a hole in the shell to accommodate the servo motor. I got the P2 just after xmas, so it should be the...

My brand new HD-3D won't budge via the top servo (the yaw I believe). It appears to be 100% frozen in place. The other two rotate freely. I've run it through the calibration tool and after adjustment, it's fine, but the gimbal simply won't budge on that axis? Any reason why? I have a Hero4...