I've connected the quad to the DJI assistant and I can't find any tab to update the Gimbal settings. All my quad pictures now feature one of the legs in the image. Is it a faulty gimbal?
Thanks
Hi, can anyone help?
I recently upgraded from an H2-3D gimbal to an H3-3D gimbal and its behavior is erratic. It hits the surface and jars when powered up and when it is operating it is all over the place and most of the time points left of right at the legs.
I have read up on forums and it...
Re: Phantom crash - was it due to descending over powerlines
Hi Damon - I'm assuming that question is aimed at me. It's an H3-3D gimbal with a gopro attached. It was my first flight with that gimbal having just upgraded from the H3-2D - except for a couple of tiny flights for testing after I...
Re: Phantom crash - was it due to descending over powerlines
VRS - Vortex Ring State. Keeping it simple it means the air coming into your props is the same air it just pushed down for lift. So your quad loses lift. Have a read of the article on Wikipedia - it might help...
Re: Phantom crash - was it due to descending over powerlines
Thanks everyone. That makes sense. For those who might be interested that was the last thirty seconds of a clip where I flew to the top of Lantau Peak, Hong Kong's second highest mountain (934m, took off from about 400m) to get some...
Re: Phantom crash - was it due to descending over powerlines
Hi Alan
Do you think definately VRS? I do try to descend whilst moving in another direction but I guess when concentrating on other things one might forget.
Hi All
http://youtu.be/OySt_iRUj6c
The clip above is the final 30 seconds of a flight using my Phantom 2. The battery level was showing around 25%. As I brought it down slowly to land it started to wobble and lose height. I tried to throttle up but it wasn't responsive. Luckily its fall was...
Hi
I'm using a DJI 5.8 transmitter and a Lilliput monitor as the receiver (and mini iOSD for flight stats). I start to lose the picture at about 300 - 350 meters but have found I can fly the Phantom significantly further.
Can anyone please recommend how the range of the transmission of FPV...
Thats cool! I'm guessing the still filled area at the top is for the batteries?
What is the device in the bottom left hand corner? Silver with a red border
Yes still have the dead battery. I've raised a ticket with dji to see if anything they can do as I live not too far from their factory.
If that's a lost cause you are welcome to . Where are you located?
Yes downloaded and installed them. Using Windows 7. Friend of mine had the same issue and he used a clean vanilla build XP machine and it worked.
Not sure it's relevant but when I plugged the P2 into the PC every few seconds the gimbal would do some strange things and start pushing the holder...
I'd thought I'd share this story as it way help others (and no doubt a few chuckles)...
One of my first few P2 flights was in an old paddy with a small 2-3ft wide river running through it. I was flying along the course of the river and got a bit too low. Clipped the slide of the bank and the...
Great thank you. So if I understand this it is the brain and then the firmware running on that brain.
Definitely leave tinkering with that for any other day.
I tried connecting the P2 to the PC but the Phantom assist wouldn't recognise the Phantom or the control. A job for another day.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.