Hi my Vision + drone was having video feed issues then it stopped sending the feed altogether then the drone sat for at least a year or more which i found is also not good . I then did some research and verified it was the wifi board that was not working like so many others with the same issue.
I have some experience with soldering and computer hardware/software so when I found the reprogramming tutorial I again verified the board was faulty with teraterm i then I managed to successfully reprogrammed my faulty vision + wifi module as per the tutorials with no issues that i know of) . I then proceeded to put a quality thermal paste on the boards to reduce heat then reinstalled the board . when i powered up the drone I still cannot get video feed to the dji app , and i still i get no ping reply from 192.168.1.10 .
after i have checked the cables re-bound the extender tried diff phones etc there was till no joy , i still get telemetry from the app and can use my camera but no video feed on the app . I then decided to try reprogramming the wifi board again thats when i came up with a problem ( see attached pic) . Could it mean that the nand is no good? I read about writing to a different part of the nand that may not be damaged somehow but could not find clear instructions to do so. any suggestions appreciated.
I have some experience with soldering and computer hardware/software so when I found the reprogramming tutorial I again verified the board was faulty with teraterm i then I managed to successfully reprogrammed my faulty vision + wifi module as per the tutorials with no issues that i know of) . I then proceeded to put a quality thermal paste on the boards to reduce heat then reinstalled the board . when i powered up the drone I still cannot get video feed to the dji app , and i still i get no ping reply from 192.168.1.10 .
after i have checked the cables re-bound the extender tried diff phones etc there was till no joy , i still get telemetry from the app and can use my camera but no video feed on the app . I then decided to try reprogramming the wifi board again thats when i came up with a problem ( see attached pic) . Could it mean that the nand is no good? I read about writing to a different part of the nand that may not be damaged somehow but could not find clear instructions to do so. any suggestions appreciated.